Yamaha CVP-103M EN - Manual (Page 99)

99
CVP-103
The playback voice can only be changed
when playback is stopped at the top of
the song.
■ Selecting Voices for 1/RIGHT and 2/LEFT Parts
The playback voices for the 1/RIGHT and 2/LEFT parts can be se-
lected in the SONG PLAY [L&R VOICE] display.
Press L & R VOICE ▼ or ▲ to highlight the corresponding function in
the display, then select the playback voice for 1/RIGHT and 2/LEFT
parts by using the data dial or [–] and [+] buttons.
You can also select a voice by using the L & R VOICE ▼ or ▲.
The [ACMP/SONG VOLUME] slider can be used to control the
overall volume of song playback.
When you enter the Song Play mode, the song volume level is auto-
matically set to the volume level that was last set in the Song Play mode,
regardless of the slider’s position. After that, moving the slider will set
the volume to the corresponding level.
Overall Song Playback Volume Control
If the Auto Accompaniment is turned on
during playback of an original song that
was recorded on the CVP-109/107/105/
103, the [ACMP/SONG VOLUME] control
will affect the level of the Auto Accompa-
niment rather than that of song playback.
VOLUME
MASTER
VOLUME ACMP/SONG
VOLUME
MAX
MIN
MAX
MIN
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Song Playback
97