Yamaha CVP-103M EN - Manual (Page 151)

151
CVP-103
• When transmitting rhythm, accompani-
ment, or harmony part data via MIDI,
do not select the MIDI channels used
by these parts as the send channels
(page 147) used to transmit the data
for your keyboard performance. Doing
so may result in your keyboard per-
formance data being mixed with the
Auto Accompaniment or Harmony
data.
• If ACMP&RHY or HARMONY is turned
on, the data for the corresponding
part(s) will be transmitted via MIDI,
even if the RIGHT1 send channel
(page 147) has been turned off.
■ Song Transmission
............................................................................................
SONG
• Settings: OFF (not transmitted),
ON (transmitted)
• Basic setting: OFF
When the SONG function is set to ON, the Clavinova will transmit
song data via the MIDI [OUT] terminal. Select this setting when you
want an external tone generator to sound in response to song data played
back by the Clavinova.
The transmission of song data is turned off by default.
■ Remote Keyboard
...............................................................................................
REMOTE KBD
• Settings: OFF (not received),
1 — 16 (receive channel)
• Basic setting: OFF
MIDI data received over the channel set with the REMOTE KBD
function will affect your keyboard performance. The received data also
can be recorded. Select
OFF to prevent external MIDI data from affect-
ing your keyboard performance. The following data types can be re-
ceived:
• Key ON/OFF
• Control Change (performance data; only those listed below)
#1 Modulation
#7 Volume
#11 Expression
#64 Sustain Pedal
#66 Sostenuto Pedal
#67 Soft Pedal
#123 All notes off
MIDI data received by the remote key-
board function cannot be output via the
MIDI [OUT] terminal.
#0 BANK Select MSB*
#32 BANK Select LSB*
#6 Data Entry MSB
(for RPN Pitch Bend Range)
#96 Data Increment
(for RPN Pitch Bend Range)
#97 Data Decrement
(for RPN Pitch Bend Range)
#100 RPN LSB
(Pitch Bend Range only)
#101 RPN MSB
(Pitch Bend Range only)
• Program Change (voice change data)*
• Pitch Bend
Note: Items marked with an asterisk are used to change the main voice.
MIDI
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
149
Harmony types transmitted on channels 6 through 8:
• Echo • Tremolo • Trill • Strumming
• Add Jazz Gtr • Add Brass • Add Strings • In The Forest
* See page 69 for details on the Harmony function.
Notes added by other harmony types are always transmitted on the
RIGHT1 channel (page 147), regardless of this setting.
The rhythm, accompaniment, and harmony parts can be recorded by a
computer or external sequencer when these functions are turned on.