Yamaha CVP-103M EN - Manual (Page 45)

45
CVP-103
Chorus
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
➔ The selected chorus type is highlighted.
Because the basic setting of the chorus type depends on the accompa-
niment style, the chorus type may change automatically when you select
a different style.
• The chorus type selection affects all
keyboard parts. Different settings
cannot be made for each part.
• Depending on the selected voice, the
depth of the effect may sound stronger
or weaker, even though the same
chorus type is selected.
• It is also possible to apply chorus
effects to the keyboard voices using
the [EFFECT] button. See the Effect
Type List on page 46 for details.
■ Setting the Chorus Depth for Each Part
...................................
The other settings in the CHORUS page let you set the chorus depth
separately for each part you play from the keyboard.
Z Select a part.
Press LEFT, RIGHT1, or RIGHT2 to set the chorus depth for the
corresponding keyboard part.
You can also select several parts at once
and adjust their settings simultaneously.
➔ The selected function is highlighted.
X Set the chorus depth.
Chorus Depth functions
• Range: 0 (no effect) — 127 (max.)
• Basic setting: Depends on voice.
Set the chorus depth for the highlighted part by using the data dial or
[–] and [+] buttons.
You can also advance a value by pressing the corresponding LCD
button. To reset a value to its basic setting, simultaneously press the
[–] and [+] buttons.
Because the basic settings of the chorus depth functions depend on
the voices selected, a chorus depth setting may change automatically
when you select a different voice.
Since the chorus feature is always on,
you should set a chorus depth of 0 for
any parts that you don’t want affected by
the chorus effect.
43