Xantrex Technology XPower Powerpack 400 Plus - Manual (Page 33)

Recharging the XPower Powerpack Battery
975-0162-01-01 3-7
Figure 3-3 Charging with DC Power
1. Insert one end of the DC Charging Cable into the DC Socket on the
front unit.
Vehicle’s 12 Vdc
Power Socket
2. Ensure the vehicle’s engine is running and insert the other end of the
DC Charging Cable into the 12 Vdc Accessory Socket in the vehicle.
≈
3 hours
charge time.
3. Disconnect the unit as soon as the battery is fully
charged or if the vehicle’s engine is turned off.
975-0162-01-01_Rev-C.book Page 7 Friday, October 20, 2006 10:40 AM