Xantrex Technology XPower Powerpack 400 Plus - Manual (Page 42)

Operation
3-16 975-0162-01-01
Control Panel Operation
Figure 3-8 Using the Control Panel
How to...
Required
Condition Required
Action
Note
Monitor total
AC power
consumed by
the
applications
powered from
the
Powerpack’s
two AC outlets Inverter’s ON / OFF
switch is turned ON ;
Output Power (W)
light illuminates
(green);
AC charger is
unplugged from the
wall AC outlet.
No action
required. The
Digital Display
will show the AC
power drawn from
the inverter by the
applications
powered from the
Powerpack’s AC
outlets. In order to save the
battery power and
ensure longer inverter
run time, press Display
Function button to turn
off the Digital Display.
Press Display Function
button again to turn the
display on for AC
power reading.
Front
Checking the
Output Power
Checking the
Battery Charge %
Flashing LED = Charging
Steady ON LED = Standby
975-0162-01-01_Rev-C.book Page 16 Friday, October 20, 2006 10:40 AM