Xantrex Technology XPower Powerpack 400 Plus - Manual (Page 62)

Maintenance
4-4 975-0162-01-01
Battery Replacement Procedure
Before attempting to replace the internal battery, make sure
you:
•
Disconnect any charging cables, 12 volt DC appliances,
and AC appliances from the XPower Powerpack.
• Turn off the AC Outlet ON / OFF switch and turn off the
light switch.
• Remove the jump-start cables.
To replace the battery:
1. Place the XPower Powerpack upright on a stable, level
surface.
2. On the backside of the XPower Powerpack, unscrew the
four fasteners on the battery cover. Place the fasteners in
the cover for safe keeping.
3. Disconnect the wires on the battery only.
Figure 4-1 Accessing the Internal Battery for Replacement
Fasteners
975-0162-01-01_Rev-C.book Page 4 Friday, October 20, 2006 10:40 AM