Xantrex Technology XPower Powerpack 400 Plus - Manual (Page 64)

Maintenance
4-6 975-0162-01-01
Replacing the External Fuse
The replacement fuse must be rated at 250 A, 32 Vdc.
(MEGA Fuse - 2 11/16" x 3/4" Holes: 2" on center. Max.
32-volt DC)
To replace the external fuse:
Figure 4-2 Replacing the Fuse
1. Locate the Fuse Cover
inside the Storage
Compartment of XPower
Powerpack.
3. Unscrew the two bolts on the fuse.
4. Replace the fuse. Ensure that the
replacement fuse is rated at 250 A,
32 Vdc and is of the same type.
5. Tighten the fuse securely with the
two bolts.
6. Replace the fuse cover.
AC Charging
Input Socket
2. Press the tab
on the Fuse Cover
toward the AC
Charge Socket
and gently pull
outward.
Fuse Cover
Unscrew these two bolts to remove the fuse.
975-0162-01-01_Rev-C.book Page 6 Friday, October 20, 2006 10:40 AM