Xantrex Technology XPower Powerpack 400 Plus - Manual (Page 43)

Control Panel Operation
975-0162-01-01 3-17
Monitor
Battery
Charging
status Inverter’s ON / OFF
switch is turned to OFF ;
All appliances must be
disconnected from the
AC and DC power
outlets;
The ON / OFF switch of
the incandescent light
must be turned to
OFF ;
The AC charger must
be plugged into the
Powerpack’s Charger
Input Socket and also
in to a household AC
outlet.
No action
required.
A flashing green
Charging Status
light indicates that
the Powerpack’s
battery needs
recharging and
that the AC
charger is
charging the
battery.
A steady green
Charging Status
light indicates that
the Powerpack’s
battery is fully
charged and the
Powerpack is
ready for use.
Recharging with the
supplied AC charger is
a true
“plug-in-and-forget”
charging method.
We recommend leaving
the AC charger
connected when the
Powerpack is not in use
to permanently
maintain the battery in
fully charged condition.
Check Battery
Charge status Inverter’s ON / OFF
switch is turned to OFF ;
All appliances must be
disconnected from the
AC and DC power
outlets;
The ON / OFF switch of
the incandescent light
must be turned to
OFF ;
The AC charger must
not be plugged into the
Powerpack’s Charger
Input Socket.
Push and hold the
Display Function
button.
The green Battery
Charge (%) light
will come on and
the Digital
Display will show
the remaining
battery capacity in
%.
This function is
disabled when the AC
charger is plugged in to
the Charger Input
Socket, or when the
inverter main switch is
ON .
For accurate Battery
Charge reading, allow
15 minutes between
charging/use and
battery capacity check.
How to...
Required
Condition Required
Action
Note
975-0162-01-01_Rev-C.book Page 17 Friday, October 20, 2006 10:40 AM