Obtaining a replacement battery – Xantrex Technology XPower Powerpack 400 Plus User Manual
Page 61
Replacing the Internal Battery
975-0162-01-01
4-3
Obtaining a Replacement Battery
When the battery reaches the end of its service life, you may
purchase a replacement through an industrial battery supplier.
The supplier should specialize in deep-cycle batteries. The
recommended replacement batteries are standard sizes used
for a variety of applications (not just the Powerpack), so you
may rest assured that the battery will continue to be widely
available many years into the future.
The factory-installed 20 amp-hour battery in your Powerpack
is not available in North America. The recommended
replacement batteries have smaller amp-hour capacities.
Using smaller capacity batteries will not affect the
Powerpack’s output power, but will result in slightly shorter
runtimes for AC and DC products.
Refer to [the table below] for a list of batteries approved for
use with the XPower Powerpack:
For the latest battery replacement information, visit
www.xantrex.com/support and view the Powerpacks FAQ.
The Powerpacks FAQ has a battery replacement guide.
Table 4-1 Battery Replacement
Battery
Capacity (Ah)
SLA1122 (ibsa.com)
18
SLA-12V18 (batterymart.com)
18
SLA-12170 (gotbatteries.com)
17
UB12180 (batterywholesale.com)
18
Yuasa NP18-12BFR (gotbatteries.com)
18
EP17-12-B1 (powerstream.com)
17
Power-Sonic PSH-12180 (batteryweb.com)
18
Panasonic LC-X1220P (gotbatteries.com)
18
975-0162-01-01_Rev-C.book Page 3 Friday, October 20, 2006 10:40 AM