Xantrex Technology XPower Powerpack 400 Plus - Manual (Page 50)

Operation
3-24 975-0162-01-01
Over-Temperature Safety Protection
The XPower Powerpack is equipped with an
over-temperature safety protection feature that automatically
turns the compressor off if it begins to exceed a safe
operating temperature.
Once the compressor cools down to its normal operating
temperature it will automatically turn on again and continue
inflating.
Figure 3-14 Nozzle Adapter Usage
To use a Nozzle Adapter:
1. Put the thumb Latch in the OPEN
position.
2. Insert the desired adapter into the
valve connector.
3. Turn clockwise to tighten.
4. Put the Thumb Latch in the CLOSED
position.
5. Insert into the Valve Receptacle on
the item to be inflated.
6. Inflate the desired item to the
appropriate pressure.
7. Remove the Valve Connector from
the valve receptacle.
8. Put the Thumb Latch in the OPEN
position.
9. Remove the adapter.
10. Store in either the Accessory Bag or
in the small compartment provided
inside the storage compartment on
the back of the unit.
Ready to use
975-0162-01-01_Rev-C.book Page 24 Friday, October 20, 2006 10:40 AM