Troubleshooting, Common problems – Xantrex Technology XPower Powerpack 400 Plus User Manual

Page 71

Advertising
background image

5-1

5

Troubleshooting

Troubleshooting will help you identify the common problems

than can occur with the XPower Powerpack.
Read this chapter before calling Customer Service.
If you cannot solve the problem with the XPower Powerpack,

record the information asked for on “Information About Your

System” on page WA–5 and then contact your dealer.

Common Problems

Buzz in Audio Equipment

Some inexpensive stereo systems have inadequate internal

power-supply filtering and may buzz slightly when powered

by the XPower Powerpack. The best solution to eliminate the

buzzing is to use an audio system with a good quality filter.

Television Interference

The XPower Powerpack is shielded to minimize interference

with TV signals. If TV signals are weak, you may see

interference in the form of lines scrolling across the TV

screen. Try one of the following suggestions to minimize or

eliminate the interference:

Use an extension cord to increase the distance between
the XPower Powerpack and the TV, antenna, and cables.

Adjust the orientation of the XPower Powerpack,
television, antenna, and cables.

Maximize TV signal strength by using a better antenna.
Use a shielded antenna cable where possible.

Try a different TV. Different models vary considerably in
their susceptibility to interference.

975-0162-01-01_Rev-C.book Page 1 Friday, October 20, 2006 10:40 AM

Advertising
This manual is related to the following products: