Xilinx MIcroblaze Development Spartan-3E 1600E - Manual (Page 99)

MicroBlaze Development Kit Spartan-3E 1600 Edition User Guide 97
UG257 (v1.1) December 5, 2007 www.xilinx.com
Configuring from SPI Flash R
To generate the actual PROM file, click Operations Æ Generate File as shown in
Figure 12-13 .
As shown in Figure 12-14 , the iMPACT software indicates that the PROM file was
successfully created. The PROM Formatter creates an output file based on the settings
shown in Figure 12-8 . In this example, the output file is called MySPIFlash.mcs.
Figure 12-12: PROM Formatting Completed
Figure 12-13: Click Operations Æ Generate File to Create the Formatted PROM File
UG257_12-12_062606
UG257_12_13_060806