Zhone Technologies 600 - Manual (Page 101)

Server Cards 4-27
ATM Card ACS-ATM Card User Screens and Settings
CELL FILL
The Cell Fill setting indicates the number of octets needed to fill in before a cell can be
shipped. This setting will determine the delay between transmitted ATM cells. The options are
1 to 47.
CDV
The Cell Delay Variation Tolerance setting determines the maximum cell arrival jitter in
multiples of 125-microsecond increments the reassembly process will tolerate in the cell
stream without producing errors on the CBR interface. The options are 1 to 128 (16
milliseconds). This helps you determine the maximum reassembly buffer size.
CLI
The Cell Loss Integration setting determines the time in milliseconds for the CLI period. If
cells are lost for this period of time, a Cell Loss Status flag is set. The options are 1000 to
65,535 (1 to 65 seconds).
VCI
The Virtual Channel Identifier is the ATM connection identification number provided by the
carrier for each service application. This number will be the same as the one placed in the VCI
setting in the VBR Configuration Screen (Figure 4-6). The options are 33 to 1023.