Zhone Technologies 600 - Manual (Page 195)

Server Cards 7-5
IMUX Card Inverse Multiplexer (IMUX) Card Settings
7.2.3 Configuration Screen
The Configuration screen is accessed by pressing the “C” key from the Main Screen Menu of
Actions. This screen controls the availability of the IMUX engines to send or receive calls
through the ISDN system. Figure 7-3 shows the IMUX Configuration screen and Table 7-3
shows the settings and options.
Figure 7-3.The IMUX Card Configure Screen
Table 7-3. IMUX Card Configure Screen Options and Defaults
STATE
The State setting determines whether the engine is active or inactive. When assigning IMUX
engines, set the State setting to standby (stdby) for ports you are not using. Set it to active
(actv) for ports that are ready for use. Since there is no penalty for having active engines (they
do not use system resources), it is suggested that all IMUX ports be set to active.
Parameter User Options Notes
STATE stdby atcv
LB STATE n/a