Zhone Technologies 600 - Manual (Page 199)

Server Cards 7-9
IMUX Card Inverse Multiplexer (IMUX) Card Settings
CURRENT PROFILE
The Current Profile indicates if a call profile is loaded into this HSU port’s dialing memory.
The options for this parameter are none (indicating that the copy of a call profile template has
not been downloaded to this port) or loaded (indicating that the copy of a call profile template
has been downloaded to this port).
Table 7-6. HSU Dial Screen of Actions
7.2.5 HSU Call Profile Screen
Once a call profile is copied from the Interface card templates, it can be used by the DTE on
HSU ports for placing calls to other devices throughout the ISDN network. The HSU Call
Profile screen is shown as Figure 7-5. Table 7-7 lists the settings and defaults for each
parameter.
Once the appropriate information is inserted or changed on the fields of this screen, you can
place a call by pressing the "D" (Dial) command from the Menu of Actions. When finished,
the call can be disconnected by pressing the "H" (Hang-up) command from the Menu of
Actions.
It is important to note that the HSU port used to dial the call must by in the standby state
when the call is placed. The state changes from standby to active after the call has been
placed. The system will not allow a call to be placed from an active port.
Note: Any changes made to the loaded call profile will stay with the call profile copy until
changed in a future session. Changes made to this copy will not change the call profile
template on the Interface card.
Action Function
Save Saves changes to settings.
Undo Returns all settings to the last saved state.
Refresh Updates certain time-related information fields that are not automatically
updated (i.e. performance and test data).
proFile Brings up the call profile screen.
Load This option loads a profile from the Interface card template. A call profile
number must be inserted. Changes the Current Profile parameter from "none"
to "loaded."
Main Returns to the HSU card main screen. If changes are made to settings and not
saved, you will be prompted to save or lose changes.