Zhone Technologies 600 - Manual (Page 223)

Server Cards 8-15
IPR Card IPR Card Configuration Screens and Settings
DEFAULT TYPE
The Default Type is where the IP is routed through: IP gateway, RIP protocol, or to the host
CPU IP node. Options are statc (goes to the specified IP gateway), dynam (figures it out
dynamically through RIP protocol) host (sends it to the host CPU IP node) and none.
DEFAULT GATEWAY
IP address of the default gateway. Options are ipaddr and none. This is only used for static
type gateway.
PROXY HOST
Enables or disables routing to and from the CPU (host) IP node. Options are enabl (enable),
and dsable (disable). This will either enable or disable routing to and from the CPU host IP
node.