Zhone Technologies 600 - Manual (Page 204)

7-14 Server Cards
Model No. Running Head Inverse Multiplexer (IMUX) Card Settings IMUX Card
7.2.6 Inverse Multiplexer - IMUX
Pressing "I" from the Menu of Actions brings up the IMUX screen and allows the user to set
the synchronization mode and timer settings used for placing IMUX calls (from Bellcore
TR-41). The purpose of these settings is to adjust the parameters of the IMUX card to match
those of the carrier providing ISDN service. If IMUX calls are prematurely terminated,
changing these settings might help to correct the problems. The "I" menu selection works
only when the IMUX Call Type parameter in the Call Profile is set to "yes."
Figure 7-6 shows the IMUX screen and Table 7-9 lists the available options with the settings
and defaults for this screen.
Figure 7-6. IMUX Call Screen