Zhone Technologies 600 - Manual (Page 92)

4-18 Server Cards
Model No. Running Head ACS-ATM Card User Screens and Settings ATM Card
Table 4-8. VBR Configuration Screen Actions
Table 4-9. VBR Configuration Screen Options and Defaults
Notes:
1. The lan option can only be selected for port C1.
2. When legacy is from a user card - U1, U2 etc. port indicates this user cards’ physical
port. In addition legacy may be from a user card in which case legacy shows a user slot
number not alterable directly from the ATM menu. When legacy is not reserved from
an external resource, then the field port is n/a.
3. The MID setting will become active when aal34 is chosen in AAL TYPE field.
4. The MEAN value increases with the number of time slots selected in the TS table field.
5. When legacy is a user card, TS will show the number of TS reserved for that user port.
Action Function
Save Saves changes to settings.
Undo Returns all settings to the last saved state.
Refresh Redraws the screen.
Perf Brings up the VBR Port Performance Data Screen.
< Scrolls left through the 68 VBR PVCs.
> Scrolls right through the 68 VBR PVCs.
Main Returns to the ACS-ATM Card Main Screen. If changes are made to settings
and not saved, you will be prompted to save or lose changes.
Parameter User Options Notes Default
STATE stdby actv stdby
AAL TYPE aal5 aal34 aal5
LEGACY wan (lan) 1 w1-1
PORT n/a 2 n/a
TS table 5 table
RATE 56k 64k 64k
VCI 33-1023 33
MID n/a 0-1023 3 n/a
TAG n/a n/a
PEAK (Kbps) n/a yes no n/a
MEAN (Kbps) 1 Peak (kbps) 4 64
MBS (Bytes ) 1-10000 5000
LBCFG off legacy atm both off