Xerox 8825 - Manual (Page 137)

8825/8830 Controller Setup Manual for Firmware 6.0 121
Configuring the Printer Processing Defaults (continued)
Label Font Size Option
Purpose of Label Font Size Option
This option sets the default size of the characters in the label in points.
Range: 6 - 72
Default: 18
PATH TO THE LABEL FONT SIZE OPTION
Display <IDLE>, press [ON-LINE], display <PAUSED>, press [ENTER],
display <UTILITIES>, press [NEXT] until <PROCESSING DEFAULTS> is
displayed, press [ENTER], display <ELECTRONIC COLLATION>, press
[NEXT] until display <LABEL> is displayed, press ENTER, press NEXT until
<LABEL SIZE> is displayed.
SELECTING THE LABEL FONT SIZE OPTION
Press the ENTER key and use the Keypad to change the option. Press
ENTER to confirm.
EXITING THE LABEL FONT SIZE OPTION
Press EXIT to set up additional functions. Press the ON-LINE key to go back
to ON-LINE mode.