Data formats supported, Ethernet cable description, Rj-45 connector pin assignments – Xerox 8825 User Manual
Page 45: Preparing the vpi port, Vpi port, Enable controller vpi port
Advertising
8825/8830 Controller Setup Manual for Firmware 6.0
29
Controller Overview
Preparing The 3003-XTP NIC Ethernet Port (continued)
Data Formats Supported
• HP-GL,
HP-GL2
• HP-RTL
• CalComp 906 /907 /951 /PCI
• TIFF
6.0
• NIRS
• Cals 1 & 2
• CGM
• VDS (Versatec Data Standards)
• VCGL
• C4
• Filenet
• Optional PostScript 3 with PDF
Ethernet Cable Description
Thinnet (10base2) Coaxial Cable with BNC connectors (plugged into a “T”
connector at each Network Interface).
10BaseT (Twisted Pair) Category 5 cable with RJ-45 connectors.
RJ-45 Connector Pin Assignments
Pin
Number
Signal Name
Pin
Number
Signal Name
1
TX+
5
No Connection
2
TX-
6
RX-
3
RX+
7
No Connection
4
No Connection
8
No Connection
Advertising