Xerox 8825 - Manual (Page 30)

8825/8830 Controller Setup Manual for Firmware 6.0 14
Controller Overview
Controller Specifications (EV4 for 8825) (continued)
I/O Ports
Serial Two 9 pin Host serial ports provided. One is used by the 8825
DDS scanner (7346 or 7356) when this option is connected. The
second is used as an input port for receiving data via serial port
connection.
Parallel (IEEE 1284 Compliant) High density port connector provided.
SCSI Optional 50 pin SCSI-2 card available.
VPI Optional card available.
TCP/IP 10/100 Ethernet Network Interface Port provided: RJ-45
connection, supporting TCP/IP only.
Network Optional External Ethernet Adapter available to support TCP/IP,
Novell 3.x, 4.x, 5.x, and NetBEUI.