Controller specifications(ev4 controller for 8825), Physical characteristics, Electrical requirements – Xerox 8825 User Manual
Page 29: Agency approvals, Hardware specifications, Controller port location, Printer control panel, Learning the displays, On-line indicator light, Led name
Advertising
8825/8830 Controller Setup Manual for Firmware 6.0
13
Controller Overview (continued)
Controller Specifications(EV4
Controller for 8825)
Physical Characteristics
The Controller is attached to the side panel of the 8825 Printer as an
embedded device.
Electrical Requirements
100 - 250 VAC auto-ranging power supply.
Agency Approvals
Safety: UL 1950, CA22.2 No. 950 (CUL), EN 60950 (CE Mark)
EMC:
CE Mark, FCC Class A, Canada Radio Interference Regulations
Class A, VCCI Class 1
Hardware Specifications
CPU
Power PC 8240 (603e) operating at 250 MHz clock speed.
RAM
64MB DRAM is standard. Maximum RAM is 256MB. Two DIMM
Slots accommodate 64 or 128MB, PC100, DIMMs.
Hard disk
Ultra SCSI, 7200 rpm internal hard disk drive.
Advertising