Xerox 8825 - Manual (Page 21)

8825/8830 Controller Setup Manual for Firmware 6.0 5
Controller Port Location (continued)
N5T/CNG Product
Code
(Note: This inverted
orientation of ports
denotes an N5T Tag 3
Controller.)
Serial
Multiprotocol Network
Interface Card (Legacy
card on N5T, CNG uses
optional adapter on
Parallel Port.)
Ethernet (BNC)
Ethernet (RJ-45)
10/100 Ethernet
Scanner SCSI
User Interface
Power (7346/56
Scanner)
User Interface
Data (7346/56
Scanners)
VPI
Parallel
Host SCSI
(not used in DDS
environment)
New EV4
Controller for
use with the
8825 Printer
10/100 Ethernet
Extra slot for adding
an optional PCI
Mezzanine Card, or
for installation of
7346/56 SCSI Kit.
Parallel
Serial
User Interface to
7346/56 scanners
using only the 15 pin
plug of 7346/56 cable
Serial Debug