2nd Ave. DVPDNET-SL DeviceNet Network Scanner DVP-0204520-02 - Manual (Page 15)

DeviceNet Network Scanner DVPDNET-SL
DVP-PLC Operation Manual 13
(8) Click on “IO Configure…” button in “Node Configuration” dialog box, and you will then see “RTU
Configuration” page.
(9) Click on “Scan IO”, and the "Warning” dialog box will appear.
(10) Click on “OK”. DeviceNetBuilder will then detect the special I/O module connected to RTU-DNET
and the number of points in the digital I/O module and display the information on "RTU
Configuration” page.