2nd Ave. DVPDNET-SL DeviceNet Network Scanner DVP-0204520-02 - Manual (Page 19)

DeviceNet Network Scanner DVPDNET-SL
DVP-PLC Operation Manual 17
(3) Confirm all the settings and click on “OK”. Next, download the configuration to DVPDNET-SL. If
DVP-SV is in RUN mode while you are downloading the configuration, a “Warning” dialog box will
appear.
(4) Click on “OK” to continue the download. Make sure DVP-SV is in RUN mode.
„ Follow the steps given above to configure DeviceNet network. If the I/O data do not include
control word and status word of RTU-DNET, the I/O data mapping of DVPDNET-SL and its slave
devices will be:
DVPDNET-SL → slave
Register in
DVPDNET-SL
Devices in slave
D6287H Digital I/O module Y0 ~ Y7 on DVP-16SP
D6287L N/A
D6288H High byte of command in VFD-B
D6288L Low byte of command in VFD-B
D6289H High byte of frequency in VFD-B
D6289L
AC motor drive
Low byte of frequency in VFD-B