Devicenet network scanner dvpdnet-sl – 2nd Ave. DVPDNET-SL DeviceNet Network Scanner DVP-0204520-02 User Manual

Page 17

Advertising
background image

DeviceNet Network Scanner DVPDNET-SL

DVP-PLC Operation Manual

15

Item

Function

Default

DIDO Output

Points (Y)

The digital output points shall be 8’s multiple. The number will

be regarded as 8 when it is less than 8 and regarded as 16

when it is bigger than 8 but less than 16.

N/A

AIAO Module

Number

The number of special I/O modules connected to RTU-DNET.

Range: 0 ~ 8

N/A

Diagnostic

Intervel Time

The interval when RTU-DNET executes diagnosis. Range:

1~ 65 secs

5 (sec)

IO Module

Offine Treatment

How RTU-DNET will react when the special I/O module

connected to it is offline. You can choose “Ignored”, "Alarm”

or “stop DeviceNet IO".

Alarm

IO Module

Error Treatment

How RTU-DNET will react when it detects errors. You can

choose “Ignored”, “Alarm” or “Stop DeviceNet IO”.

Alarm

Add control word

and status word to

IO data

For you to decide whether to add control word and status

word to I/O data. When you choose not to do it, the I/O data

in RTU-DNET and DeviceNet master will not include control

word and status word. If you choose to add them in, the I/O

data in RTU-DNET and DeviceNet master will include control

word and status word.

Not to add

(13) Confirm all the configurations are correct and click on “Download” to download the configurations to

RTU-DNET. After the download is completed, click on “OK”.

(14) After the configuration o f RTU-DNET is completed, you will return to the main page.

(15) Double click on VFD-B Drives (node 03), and the “Node Configuration…” dialog box will appear.

Advertising