3Com 3500 - Manual (Page 125)

script 125
Example Script (3500)
This example scripts these tasks to initially configure your system:
■
Changes the modem port baud
■
Sets the system name
■
Assigns an IP address for management
■
Verifies the IP connection by pinging the system
■
Enables Spanning Tree
■
Sets up SNMP trap reporting
# This script performs some start-up configurations.
#
# Set the modem serial port baud.
#
system serialPort modemSpeed
4800
# modem serial port baud
#
# Set the system name
#
system name
Eng_CoreBuilder_4
#
# Assign an IP address to the system.
#
ip interface define
158.101.112.99 # IP address for the system
255.255.0.0 # subnet mask
1 # VLAN interface index
ip interface summary all
#
# Validate access to management workstation
#
ip ping
158.101.112.26 # management workstation address
#
# Enable the Spanning Tree Protocol
#
bridge stpState enabled
#
# Configure my node as an SNMP trap destination
#
snmp trap add
158.101.112.26 # management workstation address
all
# turn on all traps
q # no more trap destinations
#
snmp trap display
#