3Com 3500 - Manual (Page 388)

388 C HAPTER 15: P ACKET F ILTERS
bridge packetFilter
✓
3500
✓
9000
9400
3900
9300
portGroup create
For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Creates a port group.
Valid Minimum Abbreviation
b pa p c
Important Considerations
■
You can create up to 32 port groups, one for each bit in the 32-bit
port group mask.
■
The portGroup create command only creates port group
associations. You must create and assign a filter to a port group to
affect filtering. See “bridge packetFilter create portGroup” and
“bridge packetFilter assign” earlier in this chapter.
■
Possible values for bridge ports (n) depend on the number of bridge
ports on the system.
Options
Prompt Description Possible Values [Default]
Select port
group mask Mask that you want to assign
to the port group
■
1 – 32
■
? (for a list of
masks)
–
Select port
group name Name of the port group that
you want to create
Use quotation marks around
any string with embedded
spaces. Use ““ to enter an
empty string
■
Up to 32
alphanumeric
characters
■
? (for name criteria)
–
Select
bridge port Number of the bridge port that
you want to add to the new
group
■
1 – n
■
all
■
? (for a list of valid
ports)
–