3Com 3500 - Manual (Page 326)

326 C HAPTER 12: M ULTI P OINT L INK A GGREGATION (MPLA)
bridge mpla
3500
9000
✓
9400
3900
9300
peerMacAddress
Specifies the MAC address of the out-of-band management port of the
attached CoreBuilder 9400 switch in the MPLA core (the peer core
switch).
Valid Minimum Abbreviation
b mp p
Important Considerations
■
You execute this command on each of the two CoreBuilder 9400
switches in the MPLA core.
■
In each core switch, you use this command to specify the MAC
address for the out-of-band management port of the attached peer
switch.
You must use this management port to connect a crossover Ethernet
cable to the out-of-band management port on the switch you are
presently configuring.
■
The input format for this MAC address is
00-00-00-00-00-00