3Com 3500 - Manual (Page 543)

ip ospf interface detail 543
State Interface state:
■ Disabled — OSPF is not enabled on the interface.
■ Down — Interface is down, but OSPF is enabled on it.
■ Loopback — Interface is a loopback interface.
■ Waiting — Router is trying to determine the identity of
the DR and BDR on the network.
■ PTP — Interface is operational and connects to either a
point-to-point network or a virtual link. The router
attempts to form adjacency with the neighboring router.
■ DRother — Interface is on a multiaccess network where
this router is not the designated router or backup
designated router.
■ BDR — Router is the backup designated router on the
attached network.
■ DR — Router is the designated router on the attached
network.
Xmit Cost Interface transmit cost
Xmit Delay Interface transmit delay (in seconds)
Field Description