3Com 3500 - Manual (Page 553)

ip ospf interface hello 553
✓ 3500
✓ 9000
9400
3900
9300
ip ospf interface hello For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Sets the interface Hello interval.
Valid Minimum Abbreviation
ip o i he
Important Considerations
■
Hello packets inform other routers that the sending router is still active
on the network.
■
If a router does not send Hello packets for a period of time specified
by the dead interval, the router is considered inactive by its neighbors.
■
The Hello packet interval must be consistent throughout the
autonomous system.
Options
Prompt Description Possible Values [Default]
IP interface Index number of one or more
interfaces for which you want
to set the Hello interval
■
One or more
valid IP interface
index numbers
■
all
■
? (for a list of
selectable
indexes)
all (factory
default), or
current value
Hello packet
interval Interval (in seconds) at which
the interface transmits Hello
packets 1 – 65535 seconds 10 (factory
default), or
current value