3Com 3500 - Manual (Page 719)

qos control modify 719
Rate limit type Type of rate limit:
■
none (no rate limit)
■
receivePort (a rate limit
on the specified ports)
■
aggregate (the
bandwidth for all ports
specified for the
associated classifier)
■
none
■
receivePort
■
aggregate
Current rate limit
type
Service level Service level for the
conforming packets.
Drop causes the system to
drop all traffic on all ports
that are associated with
the classifier/control.
■
For a rate
limit of
receivePort or
aggregate:
high, best
(best effort),
or low
■
For a rate
limit of none:
high, best,
low, or drop
Current service
level
Loss eligible Whether conforming
packets are loss-eligible. A
loss-eligible packet can be
dropped if the transmit
queue for which it is
destined exceeds its
threshold.
■
y (yes)
■
n (no)
Current value
Excess packets
service For receivePort or
aggregate rate limit types,
service level for excess
packet.
■
high
■
best
■
low
■
drop
Current value
Excess loss
eligible For receivePort or
aggregate rate limit types,
whether excess packets
are loss-eligible.
■
y (yes)
■
n (no)
Current value
How rate limit
is expressed For receivePort or
aggregate rate limit types,
format of the rate limit.
■
KBytes/sec
■
percentage
KBytes/sec
Rate limit value For receivePort or
aggregate rate limit types,
number of Kbytes/sec or a
percentage.
0 makes all packets excess
packets.
■
0 – 65434
KBytes/sec
■
0 – 100
percent
–
Prompt Description Possible Values [Default]