3Com 3500 - Manual (Page 615)

ipx route display 615
✓ 3500
✓ 9000
9400
3900
9300
ipx route display For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Displays the routing tables for the system. The routing tables include all
configured routes.
Valid Minimum Abbreviation
ipx ro d
Important Considerations
■
Your system maintains a table of routes to other IPX networks. You
can:
■
Use the Routing Information Protocol (RIP) to exchange routing
information automatically.
■
Make static entries in this table using the Administration Console.
■
The first line in the output (the status line) indicates whether:
■
IPX forwarding is enabled.
■
RIP is active.
■
SAP is active.
■
RIP Triggered updates are enabled.
■
SAP Triggered updates are enabled.
■
Secondary route/server option is enabled.
■
For a CoreBuilder 3500 system, the route table display shows the
range for the routing table primary entries in the format n – m, where
n is the current number of entries and m is the maximum number of
primary entries.
■
The maximum number of hops, or routers, that a packet can cross, is
16 (except NetBIOS packets, which can cross no more than 7 routers).
Options (3500 only)
Prompt Description Possible Values [Default]
Start of
address range First address in a range for which
you want to display routes 0x0 – 0xffffffff 0x0
End of address
range Last address in a range for which
you want to display routes 0x0 – 0xffffffff 0xffffffff