Festool RAS 115.04 E - Manual (Page 15)

15
specifi cally for the machine. Using accessories and
consumable material from other suppliers will most
likely affect the quality of your working results and
limit any warranty claims. Machine wear or your
own personal workload may increase depending on
the application. Protect yourself and your machine,
and preserve your warranty claims by always using
original Festool accessories and Festool consum-
able material!
Use only original Festool sanding pads. Low-quality
sanding pads may cause serious machine imbalance
that decreases the quality of the working results and
increase machine wear.

The order numbers of the accessories and tools
can be found in the Festool catalogue or on the
Internet under "www.festool.com".
8 Service and maintenance
Always pull the plug out of the socket before any
type of work on the machine!
All maintenance and repair work which requires
the motor housing to be opened, must only be
carried out by an authorised service workshop.
To ensure constant air circulation, always keep the
cooling-air openings in the motor housing clean and
free of blockages.
The machine is equipped with self-disconnecting
special carbon brushes. If they are worn, power is
interrupted automatically and the machine comes
to a standstill.
Customer service and repair. Only through
manufacturer or service workshops:
Please fi nd the nearest address at: www.
festool.com/Service
EKAT
1
2 3 5
4
Use only original Festool spare parts! Order
No. at: www.festool.com/Service
9 Disposal
Do not throw the power tool in your household waste!
Dispose of the machine, accessories and packaging
at an environmentally-responsible recycling centre!
Observe the valid national regulations.
EU only: European Directive 2002/96/EC stipulate
that used electric power tools must be collected
separately and disposed of at an environmentally
responsible recycling centre.
Information on REACh:
www.festool.com/reach