Acnodes RMC 7155 - Manual (Page 11)

RMC 7155
14” short depth server
11
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com. 14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
Installing the Server into a Telco Rack
To install the RMC 7155 into a Telco type rack, use two L-shaped brackets on either side of the chassis (four total). First,
determine how far the server will extend out the front of the rack. Larger chassis should be positioned to balance the weight
between front and back. If a bezel is included on your server, remove it. Then attach the two front brackets to each side of the
chassis, then the two rear brackets positioned with just enough space to accommodate the width of the rack. Finish by sliding
the chassis into the rack and tightening the brackets to the rack.