Rmc 7155, 14” short depth server – Acnodes RMC 7155 User Manual
Page 5
RMC 7155
14” short depth server
5
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
1.2 Serverboard Features
The is a dual processor serverboard based upon Intel's 5500 + ICH10R chipset. Below are the main features of the
serverboard.
Processor
The supports single or dual two Intel® 5500 Series processors in LGA1366 sockets. Please refer to our web site for a
complete listing of supported processorrp..com).
Memory
The has six 240-pin DIMM slots that can support up to 48 GB of ECC registered DDR3-1333/1066/800 or 24 GB of unbuf-
fered ECC/non-ECC DDR3-1333/1066/800 SDRAM.
Serial ATA
An on-chip (ICH10R) SATA controller is integrated into the to provide a six-port, 3 Gb/sec SATA subsystem, which is RAID
0, 1, 5 and 10 supported. The SATA drives are hot-swappable units. For more information on SATA HostRAID confi guration,
please refer to the Intel SATA HostRAID User's Guide posted on our website rp..com/support/
manuals/.
Note: You must have RAID set up to enable the hot-swap capability of the SATA drives.
PCI Expansion Slots
The has two PCI Express 2.0 x8 slots, one PCI Express 2.0 x4 slot, one PCI Express x4 slot and two PCI 33 MHz slots.
The #6 slot (see serverboard layout diagram) may be populated with a riser card (included).
Backpanel Ports
Onboard I/O backpanel ports include one COM port, a VGA port, two USB ports, PS/2 mouse and keyboard ports and two
Gigabit LAN (NIC) ports. A UID button is also included on the backpanel.
Other Features
Other onboard features that promote system health include voltage monitors, a chassis intrusion header, auto-switching
voltage regulators, chassis and CPU overheat sensors, virus protection and BIOS rescue.