Acnodes RMC 7155 - Manual (Page 24)

RMC 7155
14” short depth server
24
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com. 14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
Removing the Heatsink
1. Power down the system and unplug the power cord
from the power supply.
2. Disconnect the heatsink fan ’s wires from the fan header.
3. Using a screwdriver, loosen and remove the heatsink
screws from the serverboard in the sequence as shows in the
previous section (#1 and #2 followed by #3 and #4.
4. Hold the heatsink as showin in the picture on the right and
gently wiggle it to loosen it from the CPU.
5. Once the heatsink is loose, remove it from the CPU
socket.
6. To reinstall the heatsink, clean the surface of the CPU and
the heatsink to get rid of the old thermal grease. Reapply the
proper amount of thermal grease to the surface of the CPU
then reinstall the heatsink.