Acnodes RMC 7155 - Manual (Page 8)

RMC 7155
14” short depth server
8
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com. 14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
CHAPTER 2
2-1 Overview
This chapter provides a quick setup checklist to get your RMC 7155 up and running. Following the steps in the order given
should enable you to have the system operational within a minimal amount of time. This quick setup assumes that your RMC
7155 system has come to you with the processor and memory prein- stalled. If your system is not already fully integrated
with a motherboard, processor, system memory etc., please turn to the chapter or section noted in each step for details on
installing specific components.
2-2 Unpacking the System
You should inspect the box the RMC 7155 was shipped in and note if it was damaged in any way. If the server itself shows
damage, you should file a damage claim with the carrier who delivered it.
Decide on a suitable location for the rack unit that will hold the 6016T- MT. It should be situated in a clean, dust-free area that
is well ventilated. Avoid areas where heat, electrical noise and electromagnetic fields are generated. You will also need it
placed near a grounded power outlet. Read the Rack and Server Precautions in the next section.
2-3 Preparing for Setup
The box the RMC 7155 was shipped in should include two sets of rail assemblies, six rail mounting brackets and the mount-
ing screws you will need to install the system into the rack. Follow the steps in the order given to complete the installation
process in a minimal amount of time. Please read this section in its entirety before you begin the installation procedure
outlined in the sections that follow.