Acnodes RMC 7155 - Manual (Page 13)

RMC 7155
14” short depth server
13
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com. 14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
CHAPTER 3 SYSTEM INTERFACE
3.1 Overview
There are several LEDs on the control panel as well as others on the SATA drive carriers to keep you constantly informed of the
overall status of the system as well as the activity and health of specific components. There are also two buttons on the chassis
control panel. This chapter explains the meanings of all LED indicators and the appropriate response you may need to take.
3.2 Control Panel Buttons
There are two push buttons located on the front of the chassis: a reset button and a power on/offbutton.
The reset switch reboots the system
This is the main power switch, which is used to apply or turn off the main system power. Turning off system power with this
button removes the main power but keeps the standby power supplied to the system.