Acnodes RMC 7155 - Manual (Page 36)

RMC 7155
14” short depth server
36
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com. 14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
LAN1/LAN2 Enable/Disable
Change the setting or jumper JPL1 to enable or disable the
LAN1 port and JPL2 to enable or disable the LAN2 port on
the serverboard. See the table on the right for jumper set-
tings. The default setting is enabled.
Watch Dog
JW D enables the W atch Dog Function, a system monitor
that takes action when a software applications freezes the
system. Jumping pins 1-2 will have W D reboot the system if
a program frerezes. Jumping pins 2-3 will generate a non-
maskable interrupy for the program that has frozen. See the
table on the right for jumper settings.
I2C Bus to PCI/PCI-Exp. Slots
Jumpers JIC2 allow you to connect the system management
bus to the PCI and PCI-E slots. The defauly setting is open
(Disabled). Both jumpers must be set to the same setting.
See the table on the right for jumper settings.