Acnodes RMC 7155 - Manual (Page 25)

RMC 7155
14” short depth server
25
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com. 14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
5.6 Installing Memory Modules
1. Insert the desired number of DIMMs into the memory slots, starting with DIMM
#1A. For best performance, please use the memory modules of the same type and
same speed in the same bank. See the DIMM Installation Chart on the following
page.
2. Press down the release tabs on the ends of a memory slot. Insert each DIMM
module vertically into its slot. Pay attention to the notch along the bottom of the
module to prevent inserting the DIMM module incorrectly.
3. Gently press down on the DIMM module until it snaps into place in the slot.
Repeat for all of the modules.
4. Reverse the steps above to remove the DIMM modules from the serverboard.