Flight management – Garmin G1000 Piper PA-46 Matrix User Manual

Page 193

Advertising
background image

190-01108-00 Rev. B

Garmin G1000 Pilot’s Guide for the Piper PA-46 Mirage/Matrix

179

FLIGHT MANAGEMENT

SY

STEM

O

VER
VIEW

FLIGHT

INSTRUMENTS

EICAS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID
ANCE

AFCS

ADDITIONAL

FEA
TURES

APPENDICES

INDEX

Figure 5-36 Nearest Airport Page

Nearest Airport

Navigation Map

Showing Nearest

Airport

Runway Information

- Designation/Surface

- Length/Width

Nearest Airports

- ID/Type

- Bearing/Distance

COM/NAV Freq. Info.

- Identification

- Frequency

Window Selection

Softkeys

Airport Information

- Facility/City/Elevation

Approaches Available

LD APR Softkey (only

available if an approach

is highlighted)

Viewing information for a nearest airport on the PFD:

1)

Select the NRST Softkey to display the Nearest Airports Window. Press the FMS Knob to activate the cursor.

2)

Highlight the airport identifier with the FMS Knob and press the ENT Key to display the Airport Information
Window.

3)

To return to the Nearest Airports Window press the ENT Key (with the cursor on ‘BACK’) or press the CLR
Key. The cursor is now on the next airport in the nearest airports list. (Repeatedly pressing the ENT Key
moves through the airport list, alternating between the Nearest Airports Window and the Airport Information
Window.)

4)

Press the CLR Key or the NRST Softkey to close the PFD Nearest Airports Window.

Viewing information for a nearest airport on the MFD:

1)

Turn the large FMS Knob to select the NRST page group.

2)

Turn the small FMS Knob to select the Nearest Airports Page (it is the first page of the group, so it may already
be selected). If there are no Nearest Airports available, “NONE WITHIN 200 NM” is displayed.

3)

Select the APT Softkey; or press the FMS Knob; or press the MENU Key, highlight ‘Select Airport Window’ and
press the ENT Key. The cursor is placed in the ‘NEAREST AIRPORTS’ Box. The first airport in the nearest airports
list is highlighted.

4)

Turn the FMS Knob to highlight the desired airport. (Pressing the ENT Key also moves to the next airport.)

5)

Press the FMS Knob to remove the flashing cursor.

Advertising
This manual is related to the following products: