System overview, Pfd softkeys – Garmin G1000 Piper PA-46 Matrix User Manual

Page 37

Advertising
background image

190-01108-00 Rev. B

Garmin G1000 Pilot’s Guide for the Piper PA-46 Mirage/Matrix

23

SYSTEM OVERVIEW

SY

STEM

O

VER
VIEW

FLIGHT

INSTRUMENTS

EICAS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID
ANCE

AFCS

ADDITIONAL

FEA
TURES

APPENDICES

INDEX

PFD SOFTKEYS

The CDI, IDENT, TMR/REF, NRST, and MSG Softkeys undergo a momentary change to black text on gray

background and automatically switch back to white text on black background when selected. If messages
remain after acknowledgement, the MSG Softkey is black on white.

The PFD softkeys provide control over flight management functions, including GPS, NAV, terrain, traffic,

and lightning (optional). Each softkey sublevel has a BACK Softkey which can be pressed to return to the
previous level. The MSG Softkey is visible in all softkey levels. For the top level softkeys and the transponder
(XPDR) levels, the IDENT Softkey remains visible.

INSET

Displays Inset Map in PFD lower left corner

OFF

Removes Inset Map

DCLTR (3)

Selects desired amount of map detail; cycles through declutter levels:

DCLTR (No Declutter): All map features visible

DCLTR-1: Declutters land data

DCLTR-2: Declutters land and Special Use Airspace (SUA) data

DCLTR-3: Removes everything except for the active flight plan

TRAFFIC

Displays traffic information on Inset Map

TRAFFIC: No Traffic displayed on Inset Map

TRFC-1: Traffic displayed on Inset Map

TRFC-2: Traffic Only display shown

TOPO

Displays topographical data (e.g., coastlines, terrain, rivers, lakes) and elevation scale
on Inset Map

TERRAIN

Displays terrain information on Inset Map

STRMSCP

Displays Stormscope

®

information on Inset Map (optional)

NEXRAD

Displays NEXRAD weather and coverage on Inset Map (optional)

XM LTNG

Displays XM lightning information on Inset Map (optional)

SENSOR

Displays softkeys for selecting the #1 and #2 AHRS and Air Data Computers

ADC1

Selects the #1 Air Data Computer

ADC2

Selects the #2 Air Data Computer

AHRS1

Selects the #1 AHRS

AHRS2

Selects the #2 AHRS

PFD

Displays second-level softkeys for additional PFD configurations

SYN VIS

Displays the softkeys for enabling or disabling Synthetic Vision features

PATHWAY

Displays rectangular boxes representing the horizontal and vertical flight path of the
active flight plan

SYN TERR

Enables synthetic terrain depiction

HRZN HDG

Displays compass heading along the Zero-Pitch line

APTSIGNS

Displays position markers for airports within approximately 15 nm of the current
aircraft position. Airport identifiers are displayed when the airport is within
approximately 9 nm.

Advertising
This manual is related to the following products: