Automatic flight control system, Command bars – Garmin G1000 Piper PA-46 Matrix User Manual

Page 426

Advertising
background image

Garmin G1000 Pilot’s Guide for the Piper PA-46 Mirage/Matrix

190-01108-00 Rev. B

412

AUTOMATIC FLIGHT CONTROL SYSTEM

SY

STEM

O

VER

VIEW

FLIGHT

INSTRUMENTS

EICAS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID

ANCE

AFCS

ADDITIONAL FEA

TURES

APPENDICES

INDEX

COMMAND BARS

Upon activation of the flight director, Command Bars are displayed in magenta on the PFD. If the aircraft

is being flown by hand, the command bars are displayed hollow (Figure 7-4). The Command Bars do not
override the Aircraft Symbol. The Command Bars move together vertically to indicate pitch commands and
bank left or right to indicate roll commands.

Figure 7-4 Command Bars

Command Bars (Pilot Hand Flying Aircraft)

Aircraft Symbol

Command Bars

Command Bars (Autopilot Engaged)

If the attitude information being sent to the flight director becomes invalid or unavailable, the Command Bars

are removed from the display. The flight director Command Bars also disappear if the pitch exceeds +30˚/-20˚
or bank exceeds 65˚.

Advertising
This manual is related to the following products: