Gma 347 audio panel controls, Audio panel and cns – Garmin G1000 Piper PA-46 Matrix User Manual
Page 118
190-01108-00 Rev. B
Garmin G1000 Pilot’s Guide for the Piper PA-46 Mirage/Matrix
104
AUDIO PANEL AND CNS
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EICAS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
GMA 347 AUDIO PANEL CONTROLS
Figure 4-2 GMA 347 Audio Panel Controls
25
17
18
15
13
11
20
14
16
12
22
24
23
21
19
10
8
6
4
2
3
5
7
9
1
NOTE:
When a key is selected, an annunciator in the key is illuminated.
1
Marker Beacon Annunciators – Each annunciator lights independently when flying over the associated
marker beacon station.
2
MKR/MUTE – Selects marker beacon receiver audio. Mutes the currently received marker beacon receiver
audio. Unmutes automatically when new marker beacon audio is received. Enables Music Mute feature.
Also, stops play of recorded COM audio.
3
COM1 – When selected, audio from the #1 COM receiver can be heard.
4
COM2 – When selected, audio from the #2 COM receiver can be heard.
5
COM3 – Not used in Piper PA-46 aircraft.
6
NAV1 – When selected, audio from the #1 NAV receiver can be heard.
7
NAV2 – When selected, audio from the #2 NAV receiver can be heard.
8
DME – Turns optional DME audio on or off.
9
ADF – Turns optional ADF receiver audio on or off.
10
PLAY – Press once to play the last recorded COM audio. Press again while audio is playing and the
previous block of recorded audio will be played. Each subsequent press plays each previously recorded
block. Pressing the MKR/MUTE Key during play of a memory block stops play.
11
PILOT Squelch – Turn to adjust Pilot’s squelch. The Pilots volume knob must be pressed to allow manual
squelch adjustment.