Passenger address (pa) system, Clearance recorder and player, Audio panel and cns – Garmin G1000 Piper PA-46 Matrix User Manual

Page 152

Advertising
background image

190-01108-00 Rev. B

Garmin G1000 Pilot’s Guide for the Piper PA-46 Mirage/Matrix

138

AUDIO PANEL AND CNS

SY

STEM

O

VER

VIEW

FLIGHT

INSTRUMENTS

EICAS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID

ANCE

AFCS

ADDITIONAL FEA

TURES

APPENDICES

INDEX

PASSENGER ADDRESS (PA) SYSTEM

A passenger address system is available for delivering voice messages over the cabin speaker. Press and hold

the SPKR Key for two seconds to activate the passenger address. The SPKR Key Annunciator flashes about
once per second when the passenger address is active. When passenger address is activated, the COM MIC
Annunciators are extinguished, and the active COM frequencies on the PFDs change to white, indicating that
there is no COM selected. A Push-to-Talk (PTT) must be pressed to deliver PA announcements.

Figure 4-47 SPKR Key Selected for PA Announcements

PA is Selected on

the Audio Panel

CLEARANCE RECORDER AND PLAYER

The Audio Panel contains a digital clearance recorder that records up to 2.5 minutes of the selected COM

radio signal. Recorded COM audio is stored in separate memory blocks. Once 2.5 minutes of recording time
have been reached, the recorder begins recording over the stored memory blocks, starting from the oldest
block.

The PLAY Key controls the play function. Pressing the PLAY Key once plays the latest recorded memory

block. Pressing the PLAY Key while audio is playing begins playing the previously recorded memory block.
Each subsequent press of the PLAY Key selects the previously recorded memory block.

Pressing the MKR/MUTE Key during play of a memory block stops play. If a COM input signal is detected

during play of a recorded memory block, play is halted.

Powering off the unit automatically clears all recorded blocks.

Figure 4-48 Play Key

Advertising
This manual is related to the following products: