3 stormscope, Setting up stormscope on the navigation map, Hazard avoidance – Garmin G1000 Piper PA-46 Matrix User Manual
Page 362
Garmin G1000 Pilot’s Guide for the Piper PA-46 Mirage/Matrix
190-01108-00 Rev. B
348
HAZARD AVOIDANCE
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EICAS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EICAS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
6.3 STORMSCOPE
NOTE:
The optional Stormscope system is not intended for hazardous thunderstorm penetration. Weather
information on the G1000 MFD is approved for weather avoidance only. Refer to the WX-500 User’s Guide
for a detailed description of Stormscope operation.
NOTE:
L-3 STORMSCOPE® WX-500 Lightning and GDL 69/69A XM® Satellite Weather Lightning are
mutually exclusive.
The following pages can display Stormscope data:
• PFD Inset Map
• AUX - Trip Planning Page
• Stormscope Page
• System Page
• Navigation Map
• Nearest Pages
To display Stormscope data on any map besides the Stormscope Page, press the
MAP
Softkey (or the INSET
Softkey for the PFD Inset Map), then press the
STRMSCP
Softkey. These pages can also display cell or strike data
using the yellow lightning strike symbology shown in Table 6-5.
Lightning Age
Symbol
Strike is less than 6 seconds old
Strike is between 6 and 60 seconds old
Strike is between 1 and 2 minutes old
Strike is between 2 and 3 minutes old
Table 6-5 Lightning Age and Symbols
SETTING UP STORMSCOPE ON THE NAVIGATION MAP
Setting up Stormscope options on the Navigation Map:
1)
On the Navigation Map Page, press the MENU Key.
2)
With ‘Map Setup’ selected (Figure 6-64), press the ENT Key.
3)
Turn the small FMS Knob to display the group selection window. Turn the small FMS Knob to select ‘Weather’
(Figure 6-65), and press the ENT Key.
4)
Turn the large FMS Knob to highlight and move between the product selections.
5)
When an item is highlighted, turn the small FMS Knob to select the option.
6)
Press the ENT Key.
7)
Press the
FMS
Knob to return to the Navigation Map Page (Figure 6-66).