Garmin G1000 Piper PA-46 Matrix - Manual (Page 52)

190-01108-00 Rev. B Garmin G1000 Pilot’s Guide for the Piper PA-46 Mirage/Matrix 38
SYSTEM OVERVIEW
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EICAS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
MFD SYSTEM PAGES
In the Auxiliary (AUX) Page Group, there are two system pages: System Setup (page 5 of 7) and System Status
(page 7 of 7). The System Setup Page allows management of various system parameters, while the System
Status Page displays the status of all G1000 system LRUs.
SYSTEM SETUP PAGE
G1000 system settings are managed from the System Setup Page. The following settings can be changed:
• Time display format (local or UTC )
• Displayed measurement units
• Barometric Transition Alert
(see the Flight Instruments Section)
• Airspace alerts
(see the Flight Management Section)
• Arrival alert
• Audio alert voice
• Flight Director Format
(see the Flight Instruments Section)
• MFD Data Bar (Navigation Status Box) fields
(see the Flight Management Section)
• GPS Course Deviation Indicator (CDI) range
(see the Flight Instruments Section)
• COM transceiver channel spacing
(see the Audio Panel and CNS Section)
• Displayed nearest airports
(see the Flight Management Section)
• CDI/Baro Synchronization)
(see the Flight Instruments Section)
Restoring system setup defaults:
1) Select the AUX - System Setup Page.
2) Press the DFLTS Softkey; or press the MENU Key, highlight ‘Restore Defaults’, and press the ENT Key.