Dt4x2 switching on/off, Switch on, Switch off – AASTRA DT4x2 for MD Evolution User Guide EN User Manual
Page 32
DT4X2 General Description
MD Evolution – Cordless DT412 / DT422 / DT432
32
DT4X2 Switching On/Off
Switch on
æ
Press and hold until the display lights up.
If the phone does not switch on or the Battery icon is displayed,
the battery is low. Charge the battery.
The display shows:
Yes
Press within two seconds to confirm (see display).
Now you can use your phone.
Notes:
If the message
No System
is displayed you cannot make or
answer calls.
Depending on system programming, your phone can be
automatically locked. To unlock the phone, see section
Switch off
During calls, you cannot switch off your phone.
It is recommended that you program the Switch off function as a
Hot key, see section “
” on page 130. If you
do not program a Hot key, you can use the menus, see section
If you have not programmed a Hot key:
ç
Press the Menu key.
The last used tab is marked.
à
or
á
Select Modes tab
Switch on?
No
Yes