AASTRA DT4x2 for MD Evolution User Guide EN - Manual (Page 61)

61 MD Evolution – Cordless DT412 / DT422 / DT432
Local Phonebook
Write Text
When adding/editing or searching for names in the Phone Book,
the keys 0 to 9, *, or # can be used. The first character entered will
be an upper level character followed by lower level characters
unless the *-key is pressed before entering the character. When
pressing a key, the first available character on that specific key is
displayed. To get the following characters, press the key
repeatedly. Key 0 and 1 contain special characters. The marked
character is selected after a time-out (3 seconds) or when another
key is pressed. Pressing key 1 adds space between the
characters.
Example (to write SMITH):
The marked character is selected after a time out or when another
key is pressed. 7 7 7 7
Press for S 6
Press for M 4 4 4
Press for I 8
Press for T 4 4
Press for H ã
Press when the name is complete.
(not applicable for the System Phonebook)
Control keys
While entering a name or a number you can use the following keys
for control and navigation: à
Press to move left.
á
Press to move right. *
Press to switch between upper and lower case.
Note: It is possible to turn on/off the tone sender in a
predialed number by making a long press on the
*
key (e.g.
when calling telephone banks). Tone sender on will be
indicated with a
T
in the number, and off with
-
. If a pause is
required in the number, it is added by making a long press
on the
#
key. The pause is indicated with a
P
in the number.